-Collapse +Expand
Paradox
Search Paradox Group:

Advanced
Paradox To/From
To/FromCODEGuides
Paradox Store
PRESTWOODSTORE

Prestwood eMagazine

November Edition
Subscribe now! It's Free!
Enter your email:

   ► MB Lobby ► Corel Paradox / ObjectPAL Coding Board   Print This     

Paradox Reports Topic

 Show:
New Activity New Threads Oldest Unanswered Most Active Most Read
  


25 Threads:

Add New ThreadRandom Thread

Thread 25 of 25
Thread Starter  

PS_7361
Kupte si oxykodon, (Signal: @seconalgroup.10)
{Too Long!}
7 hours ago
New Stuff Since Your Last Visit
12
Hits

Thread 24 of 25
Thread Starter  

PS_7297
WhatsApp +1(581) 942-4296 Buy Weed ,XANAX ,Cocaine
{Too Long!}
5 days ago
Nothing New Since Your Last Visit
30
Hits

Thread 23 of 25
Thread Starter  

PS_7218
Watsap +16465806302, Buy real driving license. Nat
{Too Long!}
11 days ago
Nothing New Since Your Last Visit
45
Hits

Thread 22 of 25
Thread Starter  

PS_6509
Buy Cloned credit Cards: whatsapp: +1(672)2050601
{Too Long!}
12 days ago
Nothing New Since Your Last Visit
40
Hits

Thread 21 of 25
Thread Starter  

PS_7118
TG: +19097814439 SELL FULLSsn Dob DL CS CC CVV US
{Too Long!}
16 days ago
Nothing New Since Your Last Visit
54
Hits

Thread 20 of 25
Thread Starter  

PS_6509
BUY AUSTRALIAN DOLLARS WhatsApp:+1(672)2050
{Too Long!}
35 days ago
Nothing New Since Your Last Visit
56
Hits

Thread 19 of 25
Thread Starter  

PS_6820
Kup Nembutal, Ketaminę (WhatsApp: +4473863646
{Too Long!}
38 days ago
Nothing New Since Your Last Visit
69
Hits

Thread 18 of 25
Thread Starter  

PS_6509
在线购买真实&#
{Too Long!}
42 days ago
Nothing New Since Your Last Visit
62
Hits

Thread 17 of 25
Thread Starter  

PS_6509
OBTAIN REAL PASSPORT LEGALLY ONLINE
{Too Long!}
59 days ago
Nothing New Since Your Last Visit
75
Hits

Thread 16 of 25
Thread Starter  

PS_6509
How to Obtain a Real Passport Legally online?
{Too Long!}
67 days ago
Nothing New Since Your Last Visit
82
Hits

Thread 15 of 25
Thread Starter  

PS_6452
✨ Trustlegit.Top ✨ Dumps Shop Track
{Too Long!}
73 days ago
Nothing New Since Your Last Visit
100
Hits

Thread 14 of 25
Thread Starter  

Jon
PDF Printing
I am having trouble printing to a PDF driver unless I go out of paradox - change my default printer to the PDF Writer and then go back in. If I change the printer from the Print Dialoge box the PDF file is all messed up., , I can change the printer through code in the full Paradox version - but when this same code is run on a Runtime version - I get the same jumbled results. Any ideas?, , Using P9 with sp3 on runtime and full, Adobe Acrobat 5.0
21 years ago
14 replies. Last post:

William.S8
PDF printing are the easiest task to given the print command after open the PDf then give a print command to print the pdf easily. Luxury Transport Service in Texoma
106 days ago
Nothing New Since Your Last Visit
6460
Hits

Thread 13 of 25
Thread Starter  

SteveM
Printing Issue when migrating from Paradox 8 to 11
Greetings, We used a pushbutton method on a form to print a report in Paradox 8 and Windows 7.  Upon upgrading to Paradox 11 the report began failing with a "#Bitmap7 is too big to fit in report." error.
  • #Bitmap7 is a full-page 8.5x11 image
  • The error is printer independent, and fails even with a PDF printer
  • The report still works fine on any printer if you open the report and print directly from that
  • Shrinking the image and placing it in the middle of the page solved the problem too
  • Recucing the file size dramatically didn't help if left at 8.5x11
  • It must be that Paradox 11 is trapping an error based on image size that Paradox 8 didn't.  Is there any way to prevent it from doing this, or to tell the method to ignore the error and print anyhow? Might there be anything else obvious that I am missing? Thanks!
6 years ago
11 replies. Last post:

William.S8
Printing issue with migrating the document are the error of driver software of printer that will not give it a right command to printer for print a document. Available here https://garagedoorinsulationpros.com/ Garage Door Insulation Installation Company in The Villages
8 months ago
Nothing New Since Your Last Visit
1043
Hits

Thread 12 of 25
Thread Starter  

Peter Dissing
How To use a variable as the name for a report
Hi I would like to have our delivery-note number as the report name, so when we print it with a PDF driver, the pdf attachement would have the same name as it corresponding deliverynote. In order words how would the syntax be for renaming the report before printing ?  Rgds Peter
10 years ago
3 replies. Last post:

William.S8
Variable are used as the name for a report due to it safe it for its name to easily identify your document with its name. Available here https://arrowheadelectricllc.com/ Electrical Services in Glendale AZ
8 months ago
Nothing New Since Your Last Visit
2340
Hits

Thread 11 of 25
Thread Starter  

LC.M
Printing with Office 365
Upgraded to Office 365 & got the LCAppPrint Initialized Failed error.  Installed the Hotfix Runtime patch after un/reinstalling Paradox 11.  Now, when i try to print, the program closes.    Any ideas are welcomed.  (Using Paradox for single user database & reports.)
7 years ago
4 replies. Last post:

William.S8
Office 365 are the software that are using it for creating a documents and also connected with printer for print it own documents. Available here https://mulberryplumbingservices.com/ Residential Plumbers in Dacula GA
8 months ago
Nothing New Since Your Last Visit
1018
Hits

Thread 10 of 25
Thread Starter  

gwatchmaker
Leap year date of birth
To all, I have a report that includes dates of birth when printed.  I have 4 digit year set as true in the BDE. For one particular dob (2/29/1996), the date of birth prints as 2/29/2996!  In the table, it is 2/29/1996.  This is a leap year birthday.  Although obviously not correct, it concerns my users. This report has printed tens of thousands of dates of birth and this is the first one they have noticed is wrong. Any thoughts? Greg
5 years ago
2 replies. Last post:

William.S8
If your date of birth comoing on 29feb so your birthdate are cooming in the leap year. Available here https://gentechgeneratorllc.com/ Reliable Fuel Delivery Services in St. John VI
8 months ago
Nothing New Since Your Last Visit
1466
Hits

Thread 9 of 25
Thread Starter  

rum
Reports with Sub Reports
Anyone know If there is a way to add a subreport to a report?   This is not a Parent/child data issue.   Essentiall I need to cross tabulate data and give a summary of the report data by specific categories. Thanks
5 years ago
1 Reply:

Steven.G
I think you can put multiple table frames in the body.. historically, we've always done stuff like that by manually creating the text file for the report.. it's a ton of work, but then you can literally do anything you want
5 years ago
Nothing New Since Your Last Visit
898
Hits

Thread 8 of 25
Thread Starter  

PS_3060
Printing Error
I recently sent a project designed in P9 to friend and he is now using P11. He gets this error message when printing 1 type of report. The report is a multi page the error does not show in reports delivered in P11. Is there anyway I can get around this error without re devloping the report.  It is very tedious and time consuming report to design. Report: Layout settings(Page size,paper orientation) have been changed within the print dialog. This will require each page to be regenerated. This can take a long time for large reports. Do you wish to continue? Cheers Bill
6 years ago
1 Reply:

Steven.G
if you're using reportprintinfo to set up your print job, this might help repInfo.PanelOptions = PrintClipToWidth but that error can come from a variery of random sources.. sometimes you get that error, sometimes not
6 years ago
Nothing New Since Your Last Visit
572
Hits

Thread 7 of 25
Thread Starter  

afhynes2
Paradox 11 not printing to network printers
I have just re-installed my Paradox 11 on a Windowsx64 laptop and I cannot get it to print reports from Paradox reports themselves. However, they work perfectly if I call them up from a form in objectPAL. When I just try to print in a new Paradox sessionm I get a dialogue box that says: Printer interface setup error/ LCAppPrint Initialize failed!  Then Windows 10 just closes the program. I'm not all that good with finding out where my problem lies. Could anyone point me to some solution, please? Tony
9 years ago
11 replies. Last post:

Steven.G
most of the examples I can think of, for my recent apps, the print-to-pdf is being triggered manually.. but others are surely doing it in code, and I'm not seeing other instances of pdf failure being mentioned on the various forums also, Brother printers aren't so "standard" thesee days.. you never know....
6 years ago
Nothing New Since Your Last Visit
2832
Hits

Thread 6 of 25
Thread Starter  

PS_3060
Fixed No of Rows in Table Frame
Is it possible to fix the number of rows in a MRO table frame even if only the first 4 or 5 are populated? I'm trying to make a complex form and report which fills the total area available.
6 years ago
1 Reply:

Steven.G
most anything you can change while editing a form, you can change by setting values when you open it.. you just need to find the right parameters to set fm.open(myform) fm.thistext = "Hello" fm.thisfield = "George" fm.wait()
6 years ago
Nothing New Since Your Last Visit
691
Hits

Thread 5 of 25
Thread Starter  

Paulo.C
Paradox stops running when I change printer
Hi! I have an application for driving school management, and on most computers where it is installed, from windows xp to 10, when I press a button to choose another printer, the paradox stops running. thank you for your support
7 years ago
5 replies. Last post:

Steven.G
> Probably I'll have to run this way, the problem is that in the printer interface the screen is all in English, and the application is in Portuguese. I got the notice that you posted this, but it does not show here yet if there is a language issue, that might be part of the problem.. can you insert little temporary msgInfo messages in the printing process, to see how far it gets? to determine the specific line it fails on?
7 years ago
Nothing New Since Your Last Visit
1047
Hits

Thread 4 of 25
Thread Starter  

KBNV
Fonts in Win10 v1809
I just set up Paradox on a new system running the latest ver of Win 10 (1809).  My reports on the new system required a complete revision of the fonts used in the report.  I've been using the same ones for years and the fonts have always migrated to the new system.  This time, however, the fonts are not available in the properties, font drop down for any of the fields in my report.  The fonts are installed in the usual place and are available to the other myriad programs.  I installed Paradox from an X9 disc which I know doesn't make a difference.  I even uninstalled Paradox from the system and reinstalled using the X8 disc in the hope that it would make a difference.  It, of course, did not.  I am using other fonts that provide a similar impact.  But, not the same. Any body have any suggestions? Thanks in advance. Karen
7 years ago
3 replies. Last post:

Steven.G
find it, deleted it.. then kill the registry entries.. usually 3 or 4 of them
7 years ago
Nothing New Since Your Last Visit
1071
Hits

Thread 3 of 25
Thread Starter  

GreatDivideIT
data threshold on reports?
My client closed a large amount of jobs in November and cannot generate reports. The error is '#Record_band is too big'. They are able to use the same report but for a different time period. For example, reports from Jan thru July work. Is there a setting we can change that will accommodate a larger dataset?  Thanks! Tim Albertson, Great Divide IT Consulting LLC, 2995 Skyline Blvd., Suite # 208, Reno, NV 89509, tim@greatdivideit.com, 775-229-4415 (direct), 775-636-5047 (mobile), 775-229-4398 (fax), www.greatdivideit.com
8 years ago
6 replies. Last post:

Steven.G
{Too Long!}
7 years ago
Nothing New Since Your Last Visit
1331
Hits

Thread 2 of 25
Thread Starter  

GreatDivideIT
"Could not open query file" error
Hi. About 7 users use Paradox in a shared environment. Today we saw a new error which we are having trouble resolving. We have backups. When the user opens a *.qbe using Paradox 11 the error is  "Cannot open : WORK:Invoice_Jobs Closed THIS year.qbe". Could not open query file. The same error dialog box reads "Do you want to replace: WORK:Invoice_Jobs Closed THIS Year.qbe in the". That message is truncated.
  • What can cause this error?
  • What files are necessary to restore? It seems there is a related *.rsl file and *.db file
  • What is the reference to "WORK:filename)? There is no WORK in the actual file name.
  • Some users access this file using an older version of Paradox. Those users see a different message: "Record_Band is too big to fit in report".
  • We don't do much Paradox support and have been directed here in the past. Any clues would be appreciated. Thanks! Tim tim@greatdivideit.com
    8 years ago
    3 replies. Last post:

    Steven.G
    glad you figured it out.. a word of warning, tho.. in theory, one modified file does not necessarily require that you replace a whole folder.. you might be over-writing changed data that must be then replicated.. I would have replaced the qbe file only, at first
    8 years ago
    Nothing New Since Your Last Visit
    1129
    Hits

    Thread 1 of 25
    Thread Starter  

    Shores
    Dreaded "Report layout settings have changed" msg
    Hello everybody, I hav a long running application of mine that has some reports (only landscape ones, as far as I can see) that have begun to show the dreaded message "Report layout settings (page size, paper orientation) have been changed"... Any hint on what can I do to make them behave properly again? I'm running PDX11 (X6 edition) and/or the latest Pdx Runtime 11... I've tried resetting the page size, both to printer specific page size (I'm in Italy so the standard page format is A4) and printer specific A4, to no avail. I've tried both the DynArray report.print and the ReportPrintInfo variant, they both do the same. I'm banging my head on the wall, but no idea seems to help! Thanks for any hint, Shores
    8 years ago
    3 replies. Last post:

    Steven.G
    I resolved it by going back into the report spec and fixing it :-)
    8 years ago
    Nothing New Since Your Last Visit
    1550
    Hits

    New Thread
    Go ahead!   Use Us! Call: 916-726-5675  Or visit our new sales site: 
    www.prestwood.com


    ©1995-2026 Prestwood IT Solutions.   [Security & Privacy]  

     
    ↑