pre-set the Y graph axis independent of the data

pre-set the Y graph axis independent of the data in Paradox Graphs & Charts topic (part of our Corel Paradox / ObjectPAL Coding group).

Quick Search: independent   pre set   pre set Y   graph axis   independent of  
Larry C
Ottawa
Hi,
is there some way to pre-set the graph axis independent of the data.
I am plotting an XY graph and I want the graph to always display the Y axis to display from .6 to 1.
The values will always be within the above ranges but may not be at the exact values e.g.X from 1 to 98, Y from .7 to .95
I can set the data so that X is always from 1 to 100 but I cannot control the values of Y.
For comparison purposes, I need the Y. axis to be consistent and there are a large number of graphs so I would like to stick to Paradox.
Thanks in advance
Larry
Larry Chop, Ottawa
About Larry C
Visit Profile
Approved member.
Member subscribes to this thread with a verified email.
Old Account!
If this is your account, sign in to activate web presence data (sign in quarterly to keep active). Alternatively, you can subscribe to our monthly eMag with a valid email address.
Web Presence Hidden.
Once above is taken care of, full Profile content will display including back links, about me, my message, custom Profile html, social networking links, message board signature, company profile, etc.

Post ID #9599, 3 replies
Thread Started 5/14/2003 5:49:00 PM
View Counter=3716
Last Reply Posted 5/15/2003 7:38:00 PM)
Location=Ottawa  
Joined=7/4/2002   MB Posts=14  
rt
Castel, -- UK
Also... if you do a search on the Paradox boards here using the word 'charts' as compared to our UK 'graphs' you will find several posts I made some time back which may (not) be of interest.
rt

Thats enough of that. Ed.

About rt
Visit Profile
Approved member.
Member subscribes to this thread with a verified email.
About rt

I do like my jazz and blues!


Post ID #9602 (Level 1.1)  Reply to 9599
Thread Started 5/15/2003 7:09:00 AM
View Counter=2
Location=Castel, -- UK 
Joined=11/7/2000   MB Posts=687   KB Comments=1  
Most Recent Post
Larry C
Ottawa
Thanks fellows,
For the record, the detailed solution (Gained from another Canuck on the newsgroup)
"If you right click on the Y-axis in design mode, you can got to Scale and turn Autp-Scale off. You right click again, go to scale
and set Min Value, Max Value and Increment."

I hate to say how long I searched for this without success :-( so I appreciate your response.

The only sour note is that the Ottawa Senators Hockey Team lost tonight....
THanks again
Larru
Larry Chop, Ottawa
About Larry C
Visit Profile
Approved member.
Member subscribes to this thread with a verified email.
Old Account!
If this is your account, sign in to activate web presence data (sign in quarterly to keep active). Alternatively, you can subscribe to our monthly eMag with a valid email address.
Web Presence Hidden.
Once above is taken care of, full Profile content will display including back links, about me, my message, custom Profile html, social networking links, message board signature, company profile, etc.

Post ID #9606 (Level 1.2)  Reply to 9599
Reply Posted 5/15/2003 7:38:00 PM
Location=Ottawa  
Joined=7/4/2002   MB Posts=14  
Daniel Fought
Prestwood IT
Home office in Fresno, CA.
Use the chart properties yaxis.highvalue and yaxis.lowvalue to set the upper and lower values for the graph

Dan Fought
Senior Programmer Analyst
Prestwood IT Solutions
http://www.prestwood.com

About Daniel Fought
Visit Profile
Approved member.
Member subscribes to this thread with a verified email.
About Daniel Fought
Danial Fought is a senior programmer analyst with Prestwood IT where he develops custom Windows software and custom websites. When Dan is not coding for clients, he participates in this online community. Coding specialties include Paradox/ObjectPAL, MS Access, Visual Basic, and VS.Net/VB.Net.

Post ID #9601 (Level 1.3)  Reply to 9599
Reply Posted 5/15/2003 4:14:00 AM
Location=Home office in Fresno, CA. 
Joined=10/31/2002   MB Posts=401   KB Posts=12   KB Comments=4  
www.prestwood.com For service: 916-726-5675
or support@prestwood.com
Copyright (C) Prestwood IT Solutions.
All Rights Reserved.
Printed 8/9/2026