Posted 12 years ago on 3/2/2012 and updated 7/11/2016
Take Away:
Our QT4 series cameras replaced our old system in February 2012.
KB102363
Note:Verifying our camera system is NOT part of the whiteboard procedure nor any other procedure. When it‘s down, we wait for someone to report it.
Support Note:The DVR is in the attick and plugged into the upper left monitor in the break room. Switch input to see what‘s going on. The power cable is plugged into the server room and labeled. If it‘s locked up, okay to unplug/plug back in.
Browser compatibility: You can use IE or K-Meleon to view the cameras. The DVR Webserver is NOT compatible with Edge, Chrome, nor Firefox.
Common Setup Info
DVR Info:
server = cameras.prestwood.com
port 6036
cameras 1..8
Account Info:
Username=guest
Password=guest
Admin Account Info:
Username=Admin
Password=see MP
Android Software
IPCAM
Make=Q-See
Model=Q-See QT428 DVR
Host / IP=cameras.prestwood.com
Server Port=6036
Ch #=1 thru 8
user=guest, pw=guest
Q-See recomends SuperCam. Here is their Android instructions: