IT SOLUTIONS
Your full service technology partner! 
-Collapse +Expand
To/From Code
-Collapse +Expand Cross Ref Guide
-Collapse +Expand Members-Only
Sign in to see member-only pages.
   ► KBTo/From GuidesDelphi Prism  Print This     

Delphi Prism and PHP Cross Reference Guide

By Mike Prestwood

Delphi Prism versus PHP: A side by side comparison between Delphi Prism and PHP.

Delphi Prism

Version: This content is based on Delphi Prism (December 2008 release).

This content focuses on topics in common among the languages documented here so much of this content is likely to apply to Delphi for Win32 RemObjects Oxygene, and Delphi for .Net too.

Other Cross Reference Prism Guides
Delphi developers should also check out the following to links:

 Prism Wiki: Win32 Delphi vs. Delphi Prism
 CodeGear: Delphi Prism Syntax compared with Win32 Delphi

PHP

Version: This content is based on PHP 5 and tested using our web hosting server farm. The focus of this content is on server-side scripting.

This content focuses on topics in common among the languages documented here so nearly all this syntax applies to most PHP development environments as well as earlier versions of PHP.

Some of PHP's syntax will look similar to Perl but with significant differences.

Note: To be clear, the subject of this information is generic PHP 5 and in some cases Delphi for PHP. Although much of the information applies to other PHP tools, we only verified the syntax and information within generic PHP and/or Delphi for PHP.

 
Tool Basics
 

Developer environment basics such as common file extensions, common keyboard shortcuts, etc.

Deployment Overview

[Other Languages] 
Delphi Prism: 

Prism projects require the .Net framework and any additional dependencies you've added such as Crystal Reports.

In Visual Studio.Net, you can create a Setup and Deployment project by using any of the templates available on the New Project dialog (Other Project Types).

Prism doesn't directly support ClickOnce. At least not yet. In other words, there isn't a Security tab on the solution properties dialog. To create a ClickOnce deploy package, search the internet for mage.exe and mageui.exe.

In addition, you can use any of the many free and commercially available installation packages.

PHP: 

With PHP, you simply copy your files to a web server that is capable of running PHP pages.

More Info / Comment




Development Tools

[Other Languages] 

Languages Focus

Primary development tool(s) used to develop and debug code.

Delphi Prism: 

Delphi.Net first shipped as a compiler only with Delphi 7. Delphi 8 is a .Net dedicated solution (no Win32) but was not clearly better than VS.Net so more developers moved to VS.Net and bypassed Delphi 8. Delphi for .Net shipped with Delphi 2005, 2006, and 2007 but languished because of a lack of development and VS.Net clearly implemented more .Net CLS features than Delphi for .Net. Delphi Prism (Oxygene) strives to keep pace and in some cases out pace C# and VB.Net using the Object Pascal language.

More Info / Comment
PHP: 

Many developers just use a text editor. There are many PHP editors available including phpDesigner, and Delphi for PHP.

More Info / Comment




File Extensions

[Other Languages] 

Languages Focus

Common or primary file extensions used (not a complete list, just the basics).

Delphi Prism: 

Delphi Prism common source code file extensions include:

  • .SLN - Solution File. Contains solution specific information such as links to the projects within this solution.
  • .Oxygene - Project File. Contains project specific information but this is not the Delphi-like project file Delphi developers are used to. This is the VS.Net project file.
  • Program.pas - This is the Delphi-like .dpr project-equivalent file and contains the Main method which is the entry point for the executable. All .NET projects except for DLLs needs one.
  • .pas - Delphi Prism source file (same extension as Delphi for Win32).
  • .Designer.pas - Prism form file (a text resource file).
More Info / Comment
PHP:   .php

.php is the default extension for PHP although some developers will change the default extension in an effort to add an additional security level. If your code is tied to a particular version of PHP then some developers at the major PHP version number to the extension as in .php3, .php4, .php5, etc. 

.phtml is also sometimes used especially for files that contain both HTML and Perl code.

More Info / Comment




Overview and History

[Other Languages] 
Delphi Prism: 

Language Overview: Prism is a type safe language and a fully OOP language (no global functions or variables except for a very special __Global class). You code using a fully OOP approach (everything is in a class) but you have the additional benefit of a hybrid language using a special __Global class. Prism targets the .Net CLR and Mono. Based on Borland's original work with Delphi.Net and then continued by RemObjects as Oxygene, and now co-developed by CodeGear and RemObjects.

Target Platforms: Delphi Prism is most suitable for creating .Net Framework applications. This includes desktop business application using WinForms and websites using WebForms.

More Info / Comment
PHP: 

PHP is a hybrid language with both traditional PHP and OOP features. PHP is widely-used general-purpose scripting language that is especially suited for web development and can be embedded into HTML. PHP has been used to create some amazing web content, particularly outstanding message boards.

Target Platforms: PHP is most suitable for creating websites targeting any browser (any web server with PHP installed).

More Info / Comment




Report Tools Overview

[Other Languages] 

Languages Focus

Built-In: Some development tools have a reporting tool built-in and some do not. For example, typically desktop databases such as Paradox and Access have a built-in reporting tool and typically that reporting tool is used with nearly every application built with it. A built-in reporting tool makes development of reports across many clients and applications consistent and therefore easy.

Add-On: Development tools that do not have a built-in reporting tool need to use either a currently bundled report writer, or one of the popular reporting tools that integrates well with the development tool. For example, popular reporting tools include Crystal Reports, ReportBuilder, and MS SQL Reporting Services (tied to MS SQL).

Delphi Prism: 

For WebForm applications the client target is the browser (a document interfaced GUI), a common solution is to simply output an HTML formatted page with black text and a white background (not much control but it does work for some situations).

For WinForm applications Rave Reports and Crystal Reports are very popular with Delphi Prism and Delphi for .Net developers.

More Info / Comment
PHP: 

No built-in report writer but because website development targets a client browser (a document interfaced GUI), a common solution is to simply output an HTML formatted page with black text and a white background (not much control but it does work for some situations).

More Info / Comment




 
Language Basics
 

Language basics is kind of a catch all for absolute beginner stuff. The items (common names) I chose for language basics is a bit random and include items like case sensitivity, commenting, declaring variables, etc.

Case Sensitivity

[Other Languages] 

Languages Focus

Case sensitiviy in this case is referring to commands and variable names. For example, are "printf" and "PrintF" equivalent? Are fullname and FullName equivalent? When you create commands, operations, methods, or variables should you worry about case?

Delphi Prism:   No

Prism is generally not case sensitive. Commands and variable names are not case sensitive.

Note: Prism (and Delphi for .Net) do not automatically match your typed case with the defined case as C# and VB.Net do within the Visual Studio Shell.

Syntax Example:  

The following demonstrates command and variable case insensitiviy.

var
 FullName: String;
begin
 fullname := 'Mike Prestwood';
 MessageBox.Show(fullNAME);
 MESSAGEBOX.SHOW(FULLNAME);
 messAGEbox.sHow(fullname);
end;
PHP:   Yes and No

PHP is case sensitive with variable names but not with commands. Although commands are case incenstive, I prefer to use all lowercase because it's easy to type and that's what I see most PHP coders doing and I see it on PHP.Net.

Syntax Example:

All of the following are equivalent:

echo "hello<br>";
ECHO "hello<br>";
Echo "hello<br>";
eCHo "hello<br>";

...but variables are case sensitive:

$fullname = "Mike Prestwood"; //These are two...
$FullName = "Wes Peterson";   //separate varialbes.




Code Blocks

[Other Languages] 

Languages Focus

The rules for code blocks within a language dictate where you can declare variables, how you "bracket" code, etc.

Delphi Prism:   begin..end

Same as in Delphi for Win32 but Prism also supports inline variable declaration.

Syntax Example:
function DoSomething : integer;
var
 a, b : integer;
begin
 a := 1;
 b := 2;
 var c : integer; //Prism allows inline (local) variables.
 c := a + b;
  
 result := c;
end;
PHP:   { }

In .PHP html pages, you embed PHP code between <?PHP and ?>.

For PHP, JavaScript, Java,and C++, I prefer to put the first { at the end of the first line of the code block as in the example above because I see morePHP codeformatted that way (and on PHP.Net).

PHP Alternative Syntax

Although I don't like to use it, PHP offers an alternative syntax for if, while, for, foreach, and switch. These code blocks are surrounded by statement ending keywords that all use End with camel caps such as endif, endwhile, endfor, endforeach,and endswitch.

Syntax Example:
<?PHP
$x = "Yes";
//Simple if
If ($x == "Yes")
echo "hello world";
 
//If with a block of code.
If ($x == "Yes") {
echo "Hello world";
  echo "I am a PHP coder!";
}
?>




Comments

[Other Languages] 

Languages Focus

Commenting code generally has three purposes: to document your code, for psuedo coding prior to coding, and to embed compiler directives. Most languages support both a single line comment and a multiple line comment. Some languages also use comments to give instructions to the compiler or interpreter.

Delphi Prism:   // or { ... } or (* ... *)

Commenting Code
Delphi uses // for a single line comment and both {} and (**) for multiple line comments. Although you can nest different types of multiple line comments, it is recommended that you don't.

Compiler Directives - $
A special comment. Delphi compiler directives are in the form of {$DIRECTIVE}. Of interest for comments is using the $IFDEF compiler directive to remark out code.

Syntax Example:
//This is a single line comment.
 
{
Multiple line
comment.
}
 
(*
This too is a
multiple line comment.
*)
 
{$IFDEF TEMPOUT}
//...code here
{$ENDIF}
PHP:   # or // or /* ... */

Commenting Code
Use the multi-line to comment out large blocks of code and to write multiple line comments.

Syntax Example:
#This is a comment in PHP.

//This is too!

/*
This is a multi-line
comment.
*/




Constants

[Other Languages] 

General Info: Computer Language Constants

A constant is just like a variable (it holds a value) but, unlike a variable, you cannot change the value of a constant.

Delphi Prism:   const kPI: Double=3.1459;

In Prism, you define constants similar to how you define variables but use the Const keyword instead of the Var keyword. Specifying the type is optional. If you don't specify the type, the compiler chooses the most appropriate type for you.

Declare class constants as part of the class definitions. Declare local constants above the begin..end. Although Prism support inline variables, inline constants are not supported.

Syntax Example:
//Specified type:
const
kFeetToMeter: Double = 3.2808;
  kMeterToFeet: Double = .3048; 
  kName: String = "Mike";

//Unspecified type:
const kPIShort = 3.14;
PHP:   define

In PHP, you declare constants using the define keyword:

define("CONST_NAME", "Value");

Constants in PHP are case sensitive. A common standard in PHP is to use all-uppercase letters, with underscores to separate words within the name.

Syntax Example:
define('FULL_NAME', 'Mike Prestwood');
define("AGE", 25);
  
echo "Your name is " . FULL_NAME . ".";
echo "You are " . AGE . ".";




End of Statement

[Other Languages] 

Languages Focus

In coding languages, common End of statement specifiers include a semicolon and return (others exist too). Also of concern when studying a language is can you put two statements on a single code line and can you break a single statement into two or more code lines.

Delphi Prism:   ;

Object Pascal uses a semicolon ";" as an end of statement specifier and you can put multiple statements on a single line of code and put a single statement on two or more code lines if you wish.

Syntax Example:  
MessageBox.Show("Hello1");
MessageBox.Show("Hello2");
MessageBox.Show("Hello3");

//Same line works too:
MessageBox.Show("Hello4");  MessageBox.Show("Hello5");

//Two or more lines works too:
MessageBox.Show
("Hello6");
PHP:   ;
Syntax Example:
echo "Hello";




Literals

[Other Languages] 

General Info: Programming Literals

A value directly written into the source code of a computer program (as opposed to an identifier like a variable or constant). Literals cannot be changed. Common types of literals include string literals, floating point literals, integer literals, and hexidemal literals. Literal strings are usually either quoted (") or use an apostrophe (') which is often referred to as a single quote. Sometimes quotes are inaccurately referred to as double quotes.

Languages Focus

In addition to understanding whether to use a quote or apostrophe for string literals, you also want to know how to specify and work with other types of literals including floating point literals. Some compilers allow leading and trailing decimals (.1 + .1), while some require a leading or trailing 0 as in (0.1 + 0.1). Also, because floating point literals are difficult for compilers to represent accurately, you need to understand how the compiler handles them and how to use rounding and trimming commands correctly for the nature of the project your are coding.

Delphi Prism:   quote or apostrophe

In Prism, you use either quotes or apostrophes for string literals.

Different than Delphi, you can start floating point literals with a decimal or an integer. For example, to specify a fractional floating point literal between 1 and -1, you can preceed the decimal with a 0 or not.

x := .1 + .1;     //Does work.
x := 0.1 + 0.1;   //Does work.
Syntax Example:  
MessageBox.Show('Hello');
MessageBox.Show("Hello");

//Example of embedding quotes and apostropes:
MessageBox.Show('He said, "Who''s computer?"');
MessageBox.Show("She said, ""Mike's computer"".");
PHP:   quote or apostrophe

In PHP you can use quotes, or apostrophes as in "Prestwood", and 'Prestwood' for string literals. Use a slash in front of a quote or apostrophe to embed same type as in \' and \".

To specify a floating point literal between 1 and -1, you can preceed the decimal with a 0 or not (both work). In other words, preceding and following decimals are allowed (both .1 and 0.1). Trailing decimals are also allowed (1, 1., and 1.0 are all equivalent and allowed).

Syntax Example:
echo "Mike's drums are over there.<br>";
echo 'Mike said, "hi!"<br>';
  
//Does PHP evaluate this simple
//floating point math correctly? No! 
If ((.1 + .1 + .1) == .3) {
 Echo "Correct";
} Else {
 Echo "Not correct";
}




Variables

[Other Languages] 

Languages Focus

A variable holds a value that you can use and change throughout your code so long as the variable is within scope. With variable declaration, you not only want to know the syntax of how you declare a variable but you also want to know where. Are you allowed to declare a variable inline? What are the available scopes: local vs. global. Can you assign a value at the same time you declare a variable?

Delphi Prism:   var x: Integer := 0;

Prism supports type inference where you just use a variable and the compiler will then choose the lowest type possible (such as an Integer before a LongInt). With Prism, you frequently do not have to use commands to convert from one type to another.

Variable names are not case sensitive. The Prism language offers both old-style declaring variables before the begin as well as in-line variable declaration.

Prism does support variable initialization too.

Prism offers many variable types. Some common variable types include Integer, LongInt, Single, Double, Boolean, and String.

Syntax Example:  
var
FName: String; //This is old-style.
begin
FName := "Mike Prestwood";
MessageBox.Show(FName);

Var Age: LongInt; //Local variables.
Age:=36;
MessageBox.Show(Fname + " is " + Age + " years old");

//Assign values too...
Var Wife: String:="Lisa"; Var WifeAge: Integer:=32;
messagebox.Show(wife + " is " + Wifeage + ".");
end;
PHP:   $x = 0;

PHP is a loosely typed language. No variable types in PHP. Declaring and using variables are a bit different than in other languages. In PHP, you identify and use a variable with a $ even within strings!

You assign by reference with & as in &$MyVar.

Syntax Example:
$fullname = 'Mike Prestwood';
$FullName = 'Wes Peterson'; //This is a different variable!
$Age = 38;
$Weight = 162.4;
 

echo "Your name is $fullname.
";
echo "You are $Age and weigh $Weight.
";




 
Language Details
 

Language Details is kind of a catch all for stuff that didn't make it into language basics nor any other category.

Custom Routines

[Other Languages] 

Languages Focus

For non-OOP languages, a custom routine is a function, procedure, or subroutine and for pure OOP languages, a custom routine is a class method. Hybrid languages (both non-OOP and OOP) combine both.

Delphi Prism:   method, procedure, function

In Prism, everything is within a class (just like with C#, VB.Net, and Java). So you create class methods using the method keyword. Alternatively, you can use procedure or function if you want the compiler to enforce returning or not returning a value.

[function/procedure] RoutineName : ReturnType; 

As with C++, your custom routine must come before it's first usage or you have to prototype it in the Interface section.

Syntax Example:
method Form1.IntroduceYourself;
begin
  MessageBox.Show("Hello, I do not have a name yet.");
end;

procedure Form1.SayHello(pName: String);
begin
  MessageBox.Show("Hello " + pName);
end;
 
function Form1.Add(p1, p2 : Double): Double;
begin
  Result := p1 + p2;
end;
PHP:  "Custom Function" function

PHP uses functions and loosely typed parameters. Function definitions can come before or after their usage so my preference when mixing PHP in with a mostly HTML page is to put the functions after the </html> tag.

Syntax Example:
function sayHello($pName) {
 echo "Hello " . $pName . "<br>";
}
 
function add($p1, $p2) {
 return $p1 + $p2;
}




Event Handler

[Other Languages] 

In computer programming, an event handler is part of event driven programming where the events are created by the framework based on interpreting inputs. Each event allows you to add code to an application-level event generated by the underlying framework, typically GUI triggers such as a key press, mouse movement, action selection, and an expired timer. In addition, events can represent data changes, new data, etc. Specifically, an event handler is an asynchronous callback subroutine that handles inputs received in a program.

A custom event is a programmer created event. For example, you can contrast an event handler with a member event, an OOP concept where you add an event to a class.

Languages Focus

Many development environments and compilers provide for event driven programming, a standard set of application events such as startup, end, on click of a button, etc. This section documents the applicaton event handler or an overview for each language.

For OOP languages, do not confuse this section with class member events discussed in the OOP Details section of our Cross Reference Coding Encyclopedia.

Delphi Prism: 

The Prism event handler is based on the .Net event handler.

Most notable for Delphi developers is the fact that Prism does not offer initialization nor finalization sections.

More Info / Comment
[Not specified yet. Coming...]




Inline Code

[Other Languages] 

Languages Focus

Also known as embedded code where you embed another syntax language within the native code of the development environment you are using. The inline code can be compiled by the current development's compiler or by an external compiler.

Do not confuse with inlining which is a coding technique where custom routines are moved inline where the code is executed either by you, by a compiler directive, or automatically by the compiler.

Delphi Prism:   Not Supported

Prism does not support Delphi's asm keyword. Since all the .Net languages compile into intermediate language (IL), and not to a specific CPU, they do not provide support for inline assembler code.

[Not specified yet. Coming...]




Inlining

[Other Languages] 

General Info: Inline Routines

Instead of calling a routine, you move the code from the routine itself and expand it in place of the call. In addition to manual inlining, some languages support automatic inlining where the compiler or some other pre-compiler decides when to inline a code routine. Also, some languages allow for developer defined inlining where the developer can suggest and/or force the inlining of a code routine. Inlining can optimize your code for speed by saving a call and return, and parameter management.

Languages Focus

Does it support inlining? If so, does it support developer defined inlining? Does it support automatic inlining? Both?

Delphi Prism:   Automatic

In Prism, inlining is automatically done for you by the JIT compiler for all languages and in general leads to faster code for all programmers whether they are aware of inlining or not.

More Info / Comment  
[Not specified yet. Coming...]




Overloading

[Other Languages] 

Types of overloading include method overloading and operator overloading.

Method Overloading is where different functions with the same name are invoked based on the data types of the parameters passed or the number of parameters. Method overloading is a type of polymorphism and is also known as Parametric Polymorphism.

Operater Overloading allows an operator to behave differently based on the types of values used. For example, in some languages the + operator is used both to add numbers and to concatenate strings. Custom operator overloading is sometimes referred to as ad-hoc polymorphism.

Delphi Prism:   implicit

Like Delphi, Prism supports overloading. However, Prism supports implicit overloading (no need for an overload keyword).

Syntax Example:
method MainForm.Add(a, b: integer): Integer;
begin
Result := a + b;
end;
  
method MainForm.Add(const msg: String; a, b: integer): String;
begin
Result := msg + (a + b);
end;
PHP: 

PHP

  • Operator - No.
  • Method -
Syntax Example:

 





Parameters

[Other Languages] 
Delphi Prism:   var, const, out

Defining
Prism allows parameters of the same type to be listed together, separated by commas, and followed with a single data type (more params of different data types can follow, after a semi-colon).

By Reference or Value (and by constant and out)
The default for parameters is by value. For by reference, add var in front of the parameter. Prism also offers constant parameters where you add const in front of the parameter. A constant parameter is like a local constant or read-only parameter the compiler can optimize. You cannot assign a value to a constant parameter, nor can you pass one as a var parameter to another routine. (But when you pass an object reference as a constant parameter, you can still modify the object's properties.) Finally, Prism offers an out parameter type which is like a var parameter except it does not have to be initialized prior.

Syntax Example:  
function Add(a, b: integer) : integer; 
begin
  Result := a + b;
end;
 
procedure ReplaceTime(var pDT: TDateTime; const pNewDT: TDateTime);
begin
end;
[Not specified yet. Coming...]




Self Keyword

[Other Languages] 
Delphi Prism:   Self

Within the implementation of a method, the identifier Self references the object in which the method is called. The Self variable is an implicit parameter for each object method. A method can use this variable to refer to its owning class.

To refer to the current instance of a class or structure, use the Self keyword. It provides a way to refer to the specific instance in which the code is currently executing. It is particularly useful for passing information about the currently executing instance.

You cannot use it with static method functions because static methods do not belong to an object instance. If you try, you'll get an error.

More Info / Comment
[Not specified yet. Coming...]




 
Data Structures
 

Data structures allow you to store and work with data. Common data structures include arrays, associative arrays, etc.

Associative Array

[Other Languages] 
A set of unique keys linked to a set of values. Each unique key is associated with a value. Think of it as a two column table. MyArray['CA'] = 'California' MyArray['AR'] = 'Arizona'

Languages Focus

Associative arrays are also known as a dictionary or a hash table in other languages.

[Not specified yet. Coming...]
PHP: 

Declare associative array with initial known values. You can also add to associative array. (You can just assign values without ever declaring it too!)

Syntax Example:
$prices = array( 'Tires'=>100, 'Spark Plugs'=>4 );
$prices['Oil'] = 10;
 
echo "Tires=" . $prices['Tires'] . "<br>";
echo "Oil=" . $prices['Oil'] . "<br>";




Pointers

[Other Languages] 

General Info: Pointers / References

A pointer is a variable type that allows you to refer indirectly to another object. Instead of holding data, a pointer holds the address to data -- the address of another variable or object. You can change the address value a pointer points to thus changing the variable or object the pointer is pointing to.

A reference is a type of pointer that cannot change and it must always point to a valid storage (no nulls).

Delphi Prism: 

Although pointer data types in Prism coding are less important than in other languages such as C++, Prism does support developer defined pointers. Use the ^ operator to declare a pointer data type. Use the @ operator to return the current address of a variable.

In .Net managed coding the use of pointers is not safe because the garbage collector may move memory around. To safely use pointers, use the unsafe keyword. However, avoid unsafe code if possible.

More Info / Comment
PHP:   Not Supported

PHP supports references which allow you to refer to the value of a variable but PHP does not support true developer defined pointers. You cannot get and use the address of a variable.

However, you can still do inexpensive assignments by assigning by reference.





 
Statements
 

Common statements such as if statements, loops, etc.

Exception Trapping

[Other Languages] 

Languages Focus

A common usage of exception handling is to obtain and use resources in a "try-it" block, deal with any exceptions in an "exceptions" block, and release the resources in some kind of "final" block which executes whether or not any exceptions are trapped.

Delphi Prism:   try..except, try..finally

Use a try..except..end block to trap and process errors.

Delphi also offers a try...finally where code will execute in the finally section no matter what. It's common to put a try..except inside a try..finally.

Syntax Example:
try
  var y: Integer;
  y := 0;
  y := 1/y;
except
  MessageBox.Show("You cannot divide by zero.");
end;
[Not specified yet. Coming...]




If Statement

[Other Languages] 
Delphi Prism:   if..else if..else

Notice in the more complete example that the semicolon for the begin..end block after end is not included. That tells the compiler something else is coming (the statement is not finished). Also note the semicolon is missing right before the final "else" statement.

Syntax Example:
//Complete example:
if x = true then begin
  ShowMessage('x is true');
end
Else If y = 'Mike' Then 
  ShowMessage('hello mike')
Else 
  ShowMessage('last option');
PHP:   if..elseif..else

The PHP if statement consists of using if, elseif, and else.

Syntax Example:
$x = 8;
  
if ($x == 10) {
 echo "x is 10."; 
} elseif ($x < 10) {
 echo "x is less than 10.";
} else {
 echo "x must be greater than 10."; 
};




 
Operators
 

A language symbol used for assignment, comparison, computational, or as a logical.

Assignment

[Other Languages] 

Languages Focus

Common assignment operators for languages include =, ==, and :=. An assignment operator allows you to assign a value to a variable. The value can be a literal value like "Mike" or 42 or the value stored in another variable or returned by a function.

Delphi Prism:   :=

Same as Delphi.

Syntax Example:
FullName: String;
Age: Integer;
  
FullName := "Randy Spitz";
Age := 38;
PHP:   =

PHP uses = for it's assignment operator.

Syntax Example:
$fullname = "Randy Spitz";
$age = 38;




Comparison Operators

[Other Languages] 

General Info: Round Floating Point Numbers

When comparing floating point numbers, make sure you round to an acceptable level of rounding for the type of application you are using.

Languages Focus

A comparison operator compares two values either literals as in "Hello" and 3 or variables as in X and Counter. Most languages use the same operators for comparing both numbers and strings. Perl, for example, uses separate sets of comparison operators for numbers and strings.

Delphi Prism:   =, <>

Same as Delphi. Common comparison operators:

= equal
<> not equal
< less than
> greater than
<= less than or equal
>= greater than or equal
Syntax Example:
//Does Prism evaluate the math correctly? No!
//This is different than later versions of 
//Delphi that muse MaxSingle in math.pas.
If .1 + .1 + .1 = .3 Then
MessageBox.Show("correct")
Else
MessageBox.Show("not correct");
PHP:   ==, != or <>

Common comparison operators:

== equal
!= or <> not equal
< less than
> greater than
<= less than or equal
>= greater than or equal

PHP 4 and above also offers === for indentical (equal plus same type) and !== for not identical (not equal or not same type).

Syntax Example:
//Does PHP evaluate the math correctly? No!
if (.1 + .1 + .1 == .3) {
echo "correct";
}
else {
echo "not correct";
}




Empty String Check

[Other Languages] 

Languages Focus

An empty string is a zero length string, a string that is equal to null (""), or not assigned. In some languages, you can check if a string is empty by comparing it to an empty string (""). Some languages distinguish between nil and null ("") so checking if the length is 0 is easier.

Delphi Prism:   length

In Prism, a string can be nil (unassigned), assigned an empty string (""), or assigned a value.  Therefore, to check if a string is empty, you have to check against both nil and (""). Alternatively, you can check the length of the string or use String.IsNullOrEmpty.

Syntax Example:
var s: String; 
 
if (s = nil) or (s = '') then
  MessageBox.Show("empty string");

or use length:

if length(s) = 0 then
  MessageBox.Show("empty string");
[Not specified yet. Coming...]




Logical Operators

[Other Languages] 

Languages Focus

Logical operators perform conditional and, or, and not operations. Some languages support both binary logical operators that link two and unary logical operators negate (make opposite) the truth value of its argument. Finally, some languages short circuit logic. For example, with this or that, if this is an expression returning true, then that is never executed.

Delphi Prism: 

Prism logical operators:

and and, as in this and that
or or, as in this or that
not Not, as in Not This
xor either or, as in this or that but not both

Syntax Example:  
//Given expressions a, b, c, and d:
if Not (a and b) and (c or d) then
  //Do something.
PHP:   and, &&, or, ||, !, Xor

PHP logical operators:

and, && and, as in this and that
or, || or, as in this or that
! Not, as in Not This
Xor either or, as in this or that but not both

Syntax Example:
#Given expressions a, b, c, and d:
if !((a && b) && (c || d)) {
  #Do something.
};




String Concatenation

[Other Languages] 
Delphi Prism:   +

Unlike Delphi, Prism performs implicit casting. To concatenate two strings, a string to an integer, or a string to a floating point number, use the + operator. For example, to convert a floating point number to a string just concatenate an empty string to the number as in "" + 3.2.

Alternatively, you can use the System.Text.StringBuilder class which frequently but not always provides faster code.

Syntax Example:
var FirstName : String;
var LastName : String;
  
FirstName := 'Mike';
LastName := 'Prestwood';
ShowMessage('Full name: ' + FirstName + ' ' + LastName);
  
//Implicit casting of numbers.
//
//This fails:
//MessageBox.Show(3.3);
//
//This works:
MessageBox.Show("" + 3.3);
PHP:  "String Concatenation" .

PHP uses a period (.) known as a dot to concatenate strings.

Syntax Example:
$fname = "Mike";
$lname = "Prestwood";

$fullname = $fname . $lname . "
";

echo "My name is " . "Mike.
";




Unary Operators

[Other Languages] 

General Info: Unary Operator

An operation with only one operand (a single input). Common unary operators include + plus, - minus, and bitwise not. Some operators can function as both unary and binary operators. For example, + and - operators can serve as either.

Languages Focus

What unary operators are supported in additoin to the standard plus, minus, and bitwise not.

Delphi Prism: 

The obvious Prism unary operators are +, -, and Not.

+ Plus
- Minus
Not Bitwise Not
Inc() Increment
Dec() Decrement

Syntax Example:
var i: Integer := 1;
Inc(i);
MessageBox.Show("" + i);  //Displays 2
PHP: 

A unary operator operates on only one value.

PHP Examples:

  • ! negation operator
  • ++ increment operator
  • -- decrement operator




 
Commands
 

Common commands (procedures and functions). A function returns a value. Optionally, it may also perform an action prior to returning a value. A procedure does not return a value or it returns void or null.

Left of String

[Other Languages] 
Delphi Prism:   Substring
Syntax Example:
MessageBox.Show("Prestwood".Substring(0, 3));
[Not specified yet. Coming...]




 
OOP Basics
 

Some languages support object-based concepts such as Paradox, Access, and VB Classic. Other languages have OO extensions and fully support object orientation in a hybrid fashion (such as C++ and Dephi for Win32). Finally, some lanages such as C#, VB.Net, Prism, and Java are entirely written in OO. Meaning, every line of code written must occur within a class).

Base Class

[Other Languages] 

Languages Focus

When you create a class, it is either a base class or inherits from another class. Some languages require all classes to inherit from a common base class and some do not.

Delphi Prism:   System.Object

In Prism, the Object keyword is an alias for the base System.Object class and is the single base class all classes ultimately inherit from.

Syntax Example:  
//Specify both namespace and class:
Cyborg = class(System.Object)
end;
  
//Use Object keyword for System.Object.
Cyborg = class(Object)
end;
  
//When none, default is System.Object.
Cyborg = class
end;
[Not specified yet. Coming...]




Class..Object

[Other Languages] 

Languages Focus

In short, a class is a data type, and an object is an instance of a class type. A class has methods (routines), properties (member variables), and a constructor. The current values of the properties is the current state of the object. The UML is one of the diagraming disciplines that allows you to document the various changing states of a series of objects.

Delphi Prism:   class..end..new

Declare your class in the Interface section. Then implement the class in the Implementation section. To create an object instance, use the New keyword. Optionally, you can use Create for backword compatibility with Delphi if you turn it on in the compatibility options. Since Prism does have a garbage collector, you do not have to free the object. If you need to free either unmanaged resources or resources where "timing" is important, implement IDisposable and take control of freeing the object yourself using Dispose.

Syntax Example:

In the interface section:

Cyborg = class(System.Object)
public method IntroduceYourself();
end;

In the Implementation section:

method Cyborg.IntroduceYourself();
begin
MessageBox.Show("Hi, I do not have a name yet.");
end;

On some event like a button click:

var T1: Cyborg;
begin
T1 := New Cyborg;
T1.IntroduceYourself;
  //No need to clean up with managed classes.
  //The garbage collector will take care of it.
end;
[Not specified yet. Coming...]




Inheritance

[Other Languages] 

The concept of a class makes it possible to define subclasses that share some or all of the main class characteristics. This is called inheritance. Inheritance also allows you to reuse code more efficiently. In a class tree, inheritance is used to design classes vertically. (You can use Interfaces to design classes horizontally within a class tree.) With inheritance, you are defining an "is-a" relationship (i.e. a chow is-a dog). Analysts using UML call this generalization where you generalize specific classes into general parent classes.

Delphi Prism:   =class(ParentClass)

In Prism, like Delphi, you use the class keyword followed by the parent class in parens. If you leave out the parent class, your class inherits from System.Object.

Syntax Example:

In the following example, a terminator T-600 is-an android. 

Android = public class
end;
 
T-600 = public class(Android)
end;
[Not specified yet. Coming...]




Member Event

[Other Languages] 

A custom event added by a programmer to a class. Custom created events need to be processed, usually by an event dispatcher within a framework.

Delphi Prism:  "Member Events" event

Like all .Net languages, Prism events are a separate type of class member. You define a member event by using the event keyword. Events depend on Delegates to define the signature (the type) of the event they represent and they maintain a list of multiple subscribers - unlike in Delphi for Win32, where each event can only have one handler

More Info / Comment
[Not specified yet. Coming...]




Member Field

[Other Languages] 

Also known as a Class Field.

A class variable defined with a specific class visibility, usually private visibility. A member property is different than a member field. A member property uses a member field to store values through accessor methods (getters and setters). For example, it is common to use a private member field to store the current value of a property. The current values of all the class member fields is the current state of the object.

Languages Focus

What modifiers apply to member fields, if any? Typical member field modifiers include scope modifiers (private, protected, etc.) and read-only. Can you initialize the value of a member field when declared ensuring a default value?

Delphi Prism: 

In Prism you can set the visibility of a member field to any visibility: private, protected, public, assembly and protected or assembly or protected.

Prism supports the readonly modifier for member fields which is handy for constant like data. In this case, I chose not to preface my read-only member field with "F" so it's usage is just like a read-only property.

Prism also support the class modifier (static data) for member fields.

Delphi developers should notice the use of := to initialize a member field (in Delphi you use an =).

Syntax Example:

Cyborg = class(System.Object)

private

FSerialNumber: String:="A100";

public

FCyborgName: String;

FCyborgAge: Integer:=0;

class SeriesID: Integer:=100; readonly;

end;

[Not specified yet. Coming...]




Member Method

[Other Languages] 

Also known as a Class Method.

A code routine that belongs to the class or an object instance (an instance of the class). Methods that belong to the class are called class methods or static methods. Methods that belong to an object instance are called instance methods, or simply methods.

When a method returns a value, it is a function method. When no value is returned (or void), it is a procedure method.

Methods frequently use method parameters to transfer data. When one object instance calls another object instance using a method with parameters, you call that messaging.

Delphi Prism:   method, procedure, function

Prism uses the keyword method for member methods and is the preferred syntax over the legacy procedure and function keywords. Although method is preferred, you can use procedure or function if you want the compiler to make sure all functions return a value and all procedures do not.

Syntax Example:

In the interface section:

Cyborg = class(System.Object)
  public method IntroduceYourself();
end;

In the Implementation section:

method Cyborg.IntroduceYourself();
begin
  MessageBox.Show("Hi, I do not have a name yet.");
end;
 

On some event like a button click:

var T1: Cyborg;
begin
  T1 := New Cyborg;
  T1.IntroduceYourself;
end;
[Not specified yet. Coming...]




Member Modifier

[Other Languages] 

Languages Focus

Traditional private, protected, public, etc. member modifiers are documented under the member visibility topic of the Cross Reference Encyclopedia. With member modifiers here, we address additional member modifiers such as method and field modifiers.

Delphi Prism:  "Member Modifiers"

Prism supports a full suite of member modifiers. Prism virtuality modifiers are virtual, override, final, and reintroduce.

Prism general modifiers are abstract, empty, async, external, locked, unsafe, implements, and iterator.

Not all member types support all member modifiers. For example, member fields support only readonly and implements.

Syntax Example:
Cyborg = public class(System.Object)
public
  method Speak(pMessage: String); virtual;
end;
 
Series888 = public class(Cyborg)
public
  method Speak(pMessage: String); override;
end;
[Not specified yet. Coming...]




Member Property

[Other Languages] 
Delphi Prism:   property..read..write

Like Delphi, Delphi Prism uses a special property keyword to both get and set the values of properties. The read and write keywords are used to get and set the value of the property directly or through an accessor method. For a read-only property, leave out the write portion of the declaration.

Prism also supports a shortcut syntax called implicit fields (known as auto-generated properties in C#):

property CyborgAge: Integer;

You can give properties any visibility you wish (private, protected, etc). It is common in Delphi and Delphi Prism to start member fields with "F" (FCName in our example) and drop the "F" with properties that manage member fields (CyborgName in our example).

Syntax Example:
Cyborg = class(System.Object)
private
  FCName: String;
public
  property CyborgName: String read FCName write FCName;
end;
[Not specified yet. Coming...]




Member Visibility

[Other Languages] 

General Info: Class Visibility Specifiers

In OOP languages, members of a class have a specific scope that indicates visibility. Standard visibility includes private, protected, and public. Private members are usable by the defining class only (fully encapsulated). They are invisible outside of the class except by friendly classes. Protected members are usable by the defining class and descendant classes only (plus friendly classes). Public members are usable wherever its class can be referenced.

Languages Focus

Traditional member visibility specifiers for fully OOP languages are private, protected, and public. Many modern OOP languages implement additional member visibilities.

Additional member modifiers are documented under the Member Modifiers topic.

Delphi Prism:  "Class Member Visibility Levels"

In Prism, you specify each class and each class member's visibility with a Class Member Visibility Level preceding the return type. Like Delphi, you group member declarations as part of defining the interface for a class in the Interface section of a unit.

Unlike Delphi, Prism supports a traditional OO approach to member visibility with additional .Net type assembly visibility. For example, private members are truly private to the class they are declared in. In Delphi for Win32, you use strict private for true traditional private visibility.

Prism also supports assembly and protected and assembly or protected which modify the visibility of protected members to include only descendants in the same assembly (and) or publicly accessible from assembly and descendant only outside (or). OO purist might object to assembly and protected and assembly or protected and I suggest you choose the traditional private, protected, and public as your first chose at least until you both fully understand them and have a specific need for them.

Syntax Example:
Cyborg = public class(System.Object)
private
  //private properties, methods, etc. here.
  FName: String;
protected 
  //protected properties, methods, etc. here.
assembly and protected
  //properties, methods, etc. here.
assembly or protected
  //properties, methods, etc. here.
public
  //properties, methods, etc. here.
end;
[Not specified yet. Coming...]




 
OOP Details
 

More object oriented (OO) stuff.

Abstraction

[Other Languages] 

General Info: Abstract Class / Abstract Member

An abstract class member is a member that is specified in a class but not implemented. Classes that inherit from the class will have to implement the abstract member. Abstract members are a technique for ensuring a common interface with descendant classes. An abstract class is a class you cannot instantiate. A pure abstract class is a class with only abstract members.

Languages Focus

Abstraction is supported at various levels with each language. A language could enforce abstraction at the class level (either enforcing a no-instantiation rule or a only abstract members rule), and with class members (member methods and/or properties).

Delphi Prism:   abstract, override

Prism supports abstract class members and abstract classes using the abstract keyword.

An abstract class is a class with one or more abstract members and you cannot instantiate an abstract class. However, you can have additional implemented methods and properties.

An abstract member is either a method (method, procedure, or function), a property, or an event in an abstract class. You can add abstract members ONLY to abstract classes using the abstract keyword.

Alternatively, you can use the empty keyword in place of abstract if you wish to instantiate the abstract class. Then you override it in a descendant class with Override.

Syntax Example:
Cyborg = public abstract class(System.Object)
public
//You can put "virtual; abstract;"
  //but it's implied with just "abstract;"
  method Speak(pMessage: String); abstract; 
method Walk; virtual; abstract;
end;
 
Series600 = public class(Cyborg)
public
procedure Speak(pMessage: String); override;
procedure Walk; override;
end;
[Not specified yet. Coming...]




Class Helper

[Other Languages] 

A. In Dephi, class helpers allow you to extend a class without using inheritance. With a class helper, you do not have to create and use a new class descending from a class but instead you enhance the class directly and continue using it as you always have (even just with the DCU).

B. In general terms, developers sometimes use the term to refer to any class that helps out another class.

Delphi Prism:  "Class Helpers" Not Supported

Although Delphi for .Net did support class helpers starting with Delphi 8, its replacement (Prism) does not, at least not yet.

[Not specified yet. Coming...]




Code Contract

[Other Languages] 

A.k.a. Class Contract and Design by Contracts.

A contract with a method that must be true upon calling (pre) or exiting (post). A pre-condition contract must be true when the method is called. A post-condition contract must be true when exiting. If either are not true, an error is raised. For example, you can use code contracts to check for the validity of input parameters, and results

An invariant is also a code contract which validates the state of the object required by the method.

Delphi Prism:  "Class Contracts" require, ensure

Prism supports class contracts with its require and ensure keywords. The require keyword is a pre condition that must be true when the method is called. The ensure keyword is a post condition that must be true when a method exits. With either, if the condition evaluates to false, then an assertion is generated.

The require and ensure keywords will expand the method body to list the preconditions; both sections can contain a list of Boolean statements, separated by semicolons.

Syntax Example:
method Cyborg.Walk(pPace);
require
pPace > 0;
  pPace < 100;
begin
ensure
FEnergyLevel >= 10;
end;
[Not specified yet. Coming...]




Constructor

[Other Languages] 

General Info: Class Constructor

Constructors are called when you instantiate an object from a class. This is where you can initialize variables and put code you wish executed each time the class is created. When you initially set the member fields and properties of an object, you are initializing the state of the object. The state of an object is the values of all it's member fields and properties at a given time.

Languages Focus

What is the syntax? Can you overload constructors? Is a special method name reserved for constructors?

Delphi Prism:  "Constructors" constructor + class name

In Prism, a constructor is called whenever a class or struct is created. You use the constructor keyword with an unnamed method. You can overload the constructor simply by adding two or more unnamed methods with various parameters.

Prism also supports a Create constructor method for backward compatibility with Delphi for Win32.

If you do not create a constructor, Prism will create an implicit constructor that initializes all member fields to their default values.

Constructors can execute at two different times. Static constructors are executed by the CLR before any objects are instantiated. Regular constructors are executed when you create an object.

Syntax Example:
Cyborg = public class
public
  constructor();
  constructor(pName: String);
end;
[Not specified yet. Coming...]




Destructor

[Other Languages] 

General Info: Class Destructor

A special class method called when an object instance of a class is destroyed. With some languages they are called when the object instance goes out of scope, with some languages you specifically have to call the destructor in code to destroy the object, and others use a garbage collector to dispose of object instances at specific times.

Desctructors are commonly used to free the object instance but with languages that have a garbage collector object instances are disposed of when appropriate. Either way, destructors or their equivalent are commonly used to free up resources allocated in the class constructor.

Languages Focus

Are object instances freed with a garbage collector? Or, do you have to destroy object instances.

Delphi Prism:  "Finalizer" finalize()

Unlike Delphi, Delphi Prism uses the .Net garbage collector to free managed object instances. Prism does not have nor need a true destructor.

In .Net, a finalizer is used to free non-managed objects such as a file or network resource. In Prism, you use the keyword finalizer to indicate the method is a finalizer. Each class can implement one and only one finalizer with a method name of finalize(), which is the method name used in Java and VB.Net.

Because you don't know when the garbage collector will call your finalizer, For non-managed resources, Microsoft recommends you implement the IDisposable interface and call it's Dispose() method at the appropriate time.

Syntax Example:
type
  Cyborg = class(IDisposable)
  private
    disposed: Boolean;
    method Dispose(disposing: Boolean);
  public
    method Dispose;
    finalizer Finalize;
  end;
[Not specified yet. Coming...]




Inheritance-Multiple

[Other Languages] 
Delphi Prism:   Not Supported
[Not specified yet. Coming...]




Interface

[Other Languages] 

An element of coding where you define a common set of properties and methods for use with the design of two or more classes.

Both interfaces and abstract classes are types of abstraction. With interfaces, like abstract classes, you cannot provide any implementation. However, unlike abstract classes, interfaces are not based on inheritance. You can apply an Interface to any class in your class tree. In a real sense, interfaces are a technique for designing horizontally in a class hierarchy (as opposed to inheritance where you design vertically). Using interfaces in your class design allows your system to evolve without breaking existing code.

Delphi Prism:  "Interfaces"

With Prism, you use the Interface keyword to define an interface and then you include one or more interfaces where you specify the single class inheritance (separated by commas).

Syntax Example:
//Interface section of unit.
IHuman = public interface
//Specify interface methods and properties here.
end;

TCyborg = public class
end;
  
TCyborgHuman = public class(TCyborg, IHuman)
//Specify each here and implement in
//implementation section.
end;
[Not specified yet. Coming...]




Overriding

[Other Languages] 

General Info: Method Overriding

Where you define or implement a virtual method in a parent class and then replace it in a descendant class.

When you decide to declare a method as virtual, you are giving permission to derived classes to extend and override the method with their own implementation. You can have the extended method call the parent method's code too.

In most OO languages you can also choose to hide a parent method. When you introduce a new implementation of the same named method with the same signature without overriding, you are hiding the parent method.

Delphi Prism:   virtual, override

Same as Delphi. In Prism, you specify a virtual method with the virtual keyword in a parent class and extend (or replace) it in a descendant class using the override keyword. Call Inherited in the descendant method to execute the code in the parent method.

Use final to prevent further extending of a member and Sealed to prevent all members of a class from further extension.

Syntax Example:
Robot = class(System.Object)
public
method Speak; virtual;
end;
  
Cyborg = class(Robot)
public
method Speak; override;
end;
[Not specified yet. Coming...]




Partial Class

[Other Languages] 

A partial class, or partial type, is a class that can be split into two or more source code files and/or two or more locations within the same source file. Each partial class is known as a class part or just a part. Logically, partial classes do not make any difference to the compiler. The compiler puts the class together at compile time and treats the final class or type as a single entity exactly the same as if all the source code was in a single location.

Languages Focus

For languages that have implemented partial classes, you need to know usage details and restrictions. Can you split a class into two or more files? Can you split a class within a source code file into two or more locations? What are the details of inheritance? Does it apply to interfaces as well?

Delphi Prism:  "Partial Classes" partial

Prism supports both partial classes and partial methods using the keyword partial. A partial method is an empty method defined in a partial class.

Syntax Example:
//Organize a large class in multiple files.
T800 = partial class(Cyborg, IHuman);
end;
  
T800 = partial class(ITalk);
end;
  
//Partial methods too:�
T800 = public partial class
private
method Walk; partial; empty;
method Run; partial; empty;
end;
[Not specified yet. Coming...]




Polymorphism

[Other Languages] 

A coding technique where the same named function, operator, or object behaves differently depending on outside input or influences. Usually implemented as parameter overloading where the same named function is overloaded with other versions that are called either with a different type or number of parameters. Polymorphism is a general coding technique and other specific implementations are common such as inheritance, operator overloading, and interfaces.

Languages Focus

Many languages support built-in polymorphism such as a "+" operator that can add both integers and decimals. The following documents the ability to implement developer defined polymorphism.

Delphi Prism: 

Prism supports the following types of polymorphism:

More Info / Comment
[Not specified yet. Coming...]




Prevent Derivation

[Other Languages] 

Languages Focus

How do you prevent another class from inheriting and/or prevent a class from overriding a member.

Delphi Prism:   sealed, final

Same keywords as Delphi (sealed uses slightly different syntax). With Prism, use the sealed keyword before the class keyword to prevent a class from being inherited from and use the final keyword to prevent a method from being overridden.

Syntax Example:  
type
  Robot = public sealed class(System.Object) 
public
method Speak(pSentence: String); virtual; final;
end;
[Not specified yet. Coming...]




Static Member

[Other Languages] 

General Info: Static Class / Static Member

A static member is a member you can have access to without instantiating the class into an object. For example, you can read and write static properties and call static methods without ever creating the class. Static members are also called class members (class methods, class properties, etc.) since they belong to the class and not to a specific object. A static class is a class that contains only static members. In the UML, these classes are described as utility classes.

Languages Focus

Languages that support static members usually at least support static member fields (the data). Some languages also support static methods, properties, etc. in which case the class member is held in memory at one location and shared with all objects. Finally, some languages support static classes which usually means the compiler will make sure a static class contains only static members.

Delphi Prism:  "Class Members" static

In Prism, you static members are also referred to as class members. You implement class members using the static keyword.

[Not specified yet. Coming...]




Go ahead!   Use Us! Call: 916-726-5675  Or visit our new sales site: 
www.prestwood.com


©1995-2023 Prestwood IT Solutions.   [Security & Privacy]